When to Use Custom Fiber optic enclosures Exporter？

Fiber enclosures come in two primary types: wall mount and rack mount. Wall-mount fiber enclosures are typically installed on walls, facilitating the housing and distribution of fiber optic cables for indoor applications. On the other hand, rack-mount fiber enclosures are employed between or within racks, offering a versatile solution for fiber cable connectivity. These fiber enclosures are commonly used together with

Link to Wirenet

, such as LC, SC, or MTP®/MPO, and may include fiber splice trays or MTP®/MPO-LC fiber cassettes. Further, rack-mount fiber enclosure has different open-close designs such as a toolless removable top cover, sliding and tilt-down drawer, detachable cable lacer panel, and bar. The elaborate design of various fiber enclosures allows different deployment scenarios and better caters to specific requirements. You can choose the fiber enclosure through

.

Fiber Enclosures, Fiber Optic Patch & Splice Enclosures are called many different names: Termination Panels, Patch & Splice Panels, Fiber Splice Box, Splice Distribution, Fiber Splice Panel, Patch Panel, Fiber Optic Panel, Patch & Splice Panel, Patch & Splice Module, Fiber Splice Closure, Fiber Splice Chassis.

No matter what you call them, they all describe a box that contains the devices to connect various fiber optic cables.

Fiber Enclosures come in different configurations such as rack mount (FIG. 1A), wall mount (FIG. 1B), and indoor or outdoor.

The rack mount type is made for 19 inch rack mounting. They may be one or more rack units (RU) high depending on the number of connections required.

One type uses fixed front panels (FIG. 2), (usually 12 slots), for mounting the appropriate adapters. Another incorporates 3 removable front panels (FIG. 3), that can accommodate 6 to 12 simplex or duplex adapter panels each. See an example of this type of Fiber Optic Patch and Splice Enclosure, here.

Want more information on Custom Fiber optic enclosures Exporter? Feel free to contact us.

The rack mount enclosures come in two flavors. One is the slide-out variety (FIG. 4), and the other incorporates a removable lid (FIG. 5). The slide out type is more expensive while the lid type is less expensive but requires the user to remove the whole enclosure from the rack to gain internal access.

 

 

Multicom&#;s slide-out type of Fiber Optic Patch and Splice Enclosure, here

The indoor wall mount is available in two or four panel construction. Outdoor Patch & Splice enclosures are used on pedestal or pole applications.

Another ingredient is the splice tray (FIG. 6), that is used for efficient management and storage of the spliced fiber optic cables.

Fiber Optic Adapters are installed into the cut outs in the enclosure to accept the various fiber optic connectors. Fiber optic pigtails (a fiber optic cable with a connector on one end), mate with the adapters and the fusion-spliced tails are stored on the splice tray.

Fiber optic jumpers and pigtails can be either Single Mode (SM) yellow or Multimode (MM) Orange.

Connector Types Color Application Configuration SC/APC Angle Polish Green Video, Data, Voice Simplex or Duplex &#;
Larger than LC &#; Lock on SC/UPC Ultra Polish Blue Data, Voice Simplex or Duplex LC/APC Angle Polish Varies Video, Data, Voice Simplex or Duplex &#;
Smaller than SC- Latch ST/UPC Ultra Polish Varies Data, Voice Simplex or Duplex

Common Connectors Names:
SC = Standard Connector, Subscriber Connector, Square Connector
LC = Little Connector, Lucent Connector, Local Connector
ST = Straight Tip Connector

 

Contact us to discuss your requirements of China Fiber optic power splitters Exporter. Our experienced sales team can help you identify the options that best suit your needs.