What are the materials for lost foam casting?

Jul. 25, 2023

Lost foam casting, also known as evaporative pattern casting or full-mold casting, is a casting process that uses foam patterns to create intricate and complex metal parts. The foam patterns are coated with a refractory material, and when molten metal is poured into the mold, the foam vaporizes, leaving behind the desired shape. Various materials can be used for lost foam casting, including:

1. Expanded Polystyrene (EPS): Expanded polystyrene foam, commonly known as EPS foam, is one of the most widely used materials for lost foam casting. EPS foam is lightweight, easy to shape, and has good thermal insulating properties. It is available in different densities and can be easily cut, carved, or molded into complex patterns, making it ideal for creating intricate castings.

2. Polyurethane Foam: Polyurethane foam is another common material used in lost foam casting. It is available in different densities and can be easily shaped and tooled. Polyurethane foam patterns offer good dimensional stability and can withstand the high temperatures during metal pouring.

3. Expanded Polypropylene (EPP): Expanded polypropylene foam, or EPP foam, is a lightweight and flexible material that is also suitable for lost foam casting. It is known for its energy absorption properties and resilience, making it resistant to deformation during the casting process.

4. Ethylene-Vinyl Acetate (EVA): Ethylene-vinyl acetate foam, commonly known as EVA foam, is used for lost foam casting in certain applications. EVA foam is flexible, easy to handle, and can be fabricated into various shapes and sizes.

Additional resources:
How Do I Choose a Packing Machine?
Why Are Essential Oils Stored in Dark Glass Bottles?
What is a Drilling Rig and Why is it Used?
What are the Differences Between EVI and Traditional Heat Pumps?
Powering Progress: Advantages and Applications of Slip Ring Induction Motors
Understanding the Chill: Exploring the Difference Between AC and Chiller Systems
Prolonging Pump Life: When and How to Replace Slurry Pump Parts

5. Polystyrene Beads: Polystyrene beads, which are small spherical particles of polystyrene, can also be used for lost foam casting. They can be molded into the desired shape and then assembled to form the foam pattern.

6. Other Foams: Besides the materials mentioned above, other foams with suitable properties, such as low thermal conductivity and good dimensional stability, can be used for lost foam casting depending on the specific requirements of the casting process.

Refractory Coating: In addition to the foam pattern, a refractory coating is applied to the foam surface to enhance its strength and improve its ability to withstand the high temperatures of molten metal. The refractory coating also helps to reduce the generation of gases during metal pouring and improves the surface finish of the final casting.

The choice of foam material for lost foam casting depends on factors such as the complexity of the part, the type of metal being cast, the desired surface finish, and the specific requirements of the casting process. Each material has its advantages and limitations, and the selection is made based on achieving the best balance of properties and cost-effectiveness for the particular casting application.

Ruiou is a professional Lost Foam White Zone Equipment supplier,any questions about lost foam,you can consult us.