5 Tips for Hand & Power Tool Safety
Hand and power tools are a necessity on any work site. However, there are a number of hazards involved in using both hand and power tools which can cause significant injuries (the use of screwdrivers alone causes tens of thousands of injuries each year).
You can find more information on our web, so please take a look.
That is why OSHA is encouraging employers and employees to recognize the potential hazards and identify ways to avoid them. Here are few OSHA tips on how to control hazards associated with the use of hand and power tools in the workplace:
1. Keep all tools in good condition with regular maintenance.
2. Use the right tool for the job.
3. Examine each tool for damage before use and do not use damaged tools.
4. Operate tools according to the manufacturers instructions.
5. Use the proper personal protective equipment.
OSHAs Construction Safety and Health Outreach Program is a resource that offers more information on identifying the dangers of hand and power tools and safety precautions to prevent employee injury.
Helpful Safety Training DVD/VHS Courses:
Hand & Power Tool Safety Training Products
Hand & Power Tool Safety Video Program
For more information, please visit LONG ZHUO.
Additional resources:Why Do I Need a Mist Eliminator?
12 Tips For Power Tool Safety
What is silica dispersion?
Tape coating machinePower tools can seem like a common part of our lives so we often overlook the hazards they can pose. But these tools can cause serious injuries when they are not maintained or used properly.
Many of the issues stem from misuse of the tools. Whether it is from lack of proper training or perhaps the development of unsafe habits it is a problem needing attention.
What Are The Issues?
The Power Tool Institute identifies three major causes of power tool injuries:
Unexpected Events
- Because most power tools operate at high speeds, when things happen, they tend to happen very quickly. Unexpected events are more likely to end badly when operators are inexperienced, plan poorly or dont understand how a particular tool works.
Taking Action
How can you help address these issues with your workforce? Train your employees on the proper use of tools ensure they know how to recognize the hazards and understand safe working procedures. But it doesnt stop there. Remember, accidents are not limited to the novice users. Even if your employees regularly use these tools, they still need refreshers on the safety practices and potential hazards.
OSHA recommends the following precautions for using power tools:
- Never carry a tool by the cord or hose.
- Never yank the cord or the hose to disconnect it from the receptacle.
- Keep cords and hoses away from heat, oil, and sharp edges.
- Disconnect tools when not using them, before servicing and cleaning them, and when changing accessories such as blades, bits, and cutters.
- Keep all people not involved with the work at a safe distance from the work area.
- Secure work with clamps or a vise, freeing both hands to operate the tool.
- Avoid accidental starting. Do not hold fingers on the switch button while carrying a plugged-in tool.
- Maintain tools with care; keep them sharp and clean for best performance.
- Follow instructions in the users manual for lubricating and changing accessories.
- Be sure to keep good footing and maintain good balance when operating power tools.
- Wear proper apparel for the task. Loose clothing, ties, or jewelry can become caught in moving parts.
- Remove all damaged portable electric tools from use and tag them: Do Not Use.
Additional Resources
For more information, please visit Power Tools Supplier.
Comments
All Comments (0)