What's the Difference Between ASME B16.47 Series A and ...

For more information, please visit our website.

Loading&#;

ASME B16.47 Large Diameter Steel Flange Standard

In November of , Subcommittee C of the American Society of Mechanical Engineers (ASME) B16 began work on the B16.47 Large Diameter Steel Flange Standard to standardize dimensions, tolerances, markings, and materials for Nominal Pipe Sizes 26&#; to 60&#;. Prior to this in July of , MSS-SP44 covered 12&#; thru 60&#; Nominal Pipe Sizes (NPS), in 150# to 900# pressure ratings in raised face (RF), flat faced (FF),and ring type joint (RTJ) facing. The initial draft was developed in December of , and went thru several adjustments before being approved and published in as Series A (Duplicating MSS-SP44 specification) and Series B (Replacing API-605 specification). Both the Series A and Series B are a weld neck and blind specifications only. Series A and Series B are manufactured in Carbon, Stainless and other alloy materials.

 

What&#;s the difference between ASME B16.47 Series A vs Series B?

Physical attributes for Series A flanges are typically thicker in flange thickness, heavier in weight, and have large diameter bolt holes in comparison to Series B in the same size and pressure rating. Series B flanges generally have more bolt holes than are in smaller in diameter, generating the need for smaller bolting hardware.  It is important to note Series A and Series B flanges are non-compatible in bolting between each other.

Application of Series A flanges are normally used for industrial connectors such as valves, pumps and pipeline separations. Series B flanges are commonly used in pipeline application.

Price points for Series A flanges tend to be more expensive due to increased steel weight, whereas Series B consumes less steel weight therefore reducing cost.

In Conclusion: ASME B 16.47 Series A and Series B flanges are for large diameter applications for piping projects from 26&#; thru 60&#;. Both Series can be manufactured using carbon, stainless, and other alloy materials.  Series A is a carryover from MSS SP44 and Series B from API 605, thus creating a more uniform standardization for the industry thru ASME B16.47.

Please contact Coastal Flange with any questions or to receive a bid winning quote tailored to your needs.

:  713-937-
: 

ASME B16.47 is an American standard for large-diameter steel flanges. This standard covers the design of flanges from NPS 26 to NPS 60. For lower sizes i.e., up to NPS 24, ASME B16.5 has to be referred. ASME B16.47 provides pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges with rating class designations 75, 150, 300, 400, 600, and 900. The Standard also includes the requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.

What is ASME B16.47 Flange Series?

The ASME B16.47 standard provides the use of two types of flange series.

• Series A flanges and
• Series B flanges.

Series A specifies flange dimensions for general-use flanges whereas Series B specifies flange dimensions for compact flanges. Series A flanges have larger bolt circle diameters than Series B flanges.

This is to be noted that Series A and Series B flanges are not interchangeable. So, the user must take care of the compatibility issues that may arise by mistake. In most cases, flanged valves, equipment bolted between flanges, and flanged equipment are compatible with only one series of these flanges.

Difference between ASME B16.47 Series A and Series B Flanges

The major differences between Series A and Series B can be decided based on the following parameters:

1. Physical Attributes:

Series A Flanges:

• Thickness and Weight: Series A flanges are thicker and heavier compared to Series B flanges. This increased thickness provides greater strength and durability.
• Bolt Holes: They have larger diameter bolt holes, which generally require larger fasteners.
• Bolt Circle Diameter: Series A flanges have a larger bolt circle diameter, which means they have fewer but larger fasteners.

Series B Flanges:

• Thickness and Weight: These flanges are thinner and lighter than Series A flanges, making them less robust.
• Bolt Holes: Series B flanges feature smaller diameter bolt holes that necessitate the use of smaller fasteners.
• Bolt Circle Diameter: They have a smaller bolt circle diameter, which results in more bolt holes and generally requires smaller bolting hardware.

2. Strength and Load Handling:

Series A Flanges:

Strength: Due to their increased thickness and material weight, Series A flanges are stronger and can handle more external loading compared to Series B flanges.

Series B Flanges:

Strength: These are relatively weaker and can handle less external loading due to their reduced thickness and lighter weight.

MIDAS supply professional and honest service.

Additional resources:
What is Ductile Iron?
How Does Flanged Gate Control Valve Work

Refer to Fig. 1 below, which highlights some of the differences:

Fig. 1: Series A vs Series B ASME B16.47 Flanges

3. Fasteners and Installation:

Series A Flanges:

Fasteners: The quantity of fasteners is fewer but larger fasteners are required. This generally leads to a larger bolt circle diameter.

Series B Flanges:

Fasteners: They require more quantities but smaller fasteners. This results in a smaller bolt circle diameter.

4. Flange Types and Standards:

Series A Flanges:

• Types: Includes weld neck flanges, blind flanges, and ring-type joint (RTJ) flanges from Class 300 through Class 900.
• Application: Series A flanges are generally used in new pipeline projects or equipment installations.

Series B Flanges:

• Types: Also includes weld neck flanges and blind flanges but does not include RTJ flanges in the standard.
• Application: More commonly used for refurbishment or replacement jobs in existing pipelines.

5. Cost:

Series A Flanges:

Price: Typically more expensive due to the higher steel content and thicker design. The increased material weight contributes to higher costs.

Series B Flanges:

Price: Generally less costly because of the reduced steel weight and thinner design, which results in lower material and manufacturing costs.

6. Compatibility and Usage:

Series A Flanges:

• Compatibility: Not compatible with Series B flanges in terms of bolting due to differences in bolt-hole sizes and patterns.
• Typical Uses: Industrial connectors such as valves, pumps, and pipeline separations.

Series B Flanges:

• Compatibility: Not compatible with Series A flanges for the same reasons mentioned above.
• Typical Uses: Often used in pipeline applications where cost-efficiency and weight considerations are more critical.

The following table provides the major differences between ASME B16.47 Series A and Series B flanges.

Sr. NoParameterASME B16.47 Series A FlangesASME B16.47 Series B Flanges1OriginEarlier Series A flanges were known as MSS SP 44 flanges.These flanges were known as API 605 flanges.2DimensionFlange Outer diameter, Bolt Circle Diameter, Flange Thickness, Bolt Diameter, etc. are larger for Series A Flanges for the same pressure rating class.B16.47 Series B flanges are compact as compared to Series A flanges.3StrengthASME B16.47 Series A flanges are comparatively stronger. Hence, can handle more external loading before leakage.Load bearing for the same pressure class is relatively less.4Fastener RequirementThe quality requirement is less but bigger size. For example, as seen in Fig. 1, a 30-inch class 150 series A flange needs 28 bolts of 1-1/4 inch diameter.The quantity of fasteners is more. For example, a 30-inch class 150 Series B flange requires 44 bolts with a diameter of 3/4 inch.5Ring type joint TypesAvailable from Class 300 through Class 900Does not exist.6Pressure Class 75Not available for series A flangesAvailable for Series B flanges7Flange WeightThe weight of ASME B16.47, series A flanges is more. So, they exert more load on piping supports.Weight is comparatively less8CostMore expensive.cheaper.9Industry UseMore frequently used. Used for critical applications.Less frequently used. Normally used for non-critical applications.ASME B 16.47 Series A vs Series B

Dimensional Comparison for ASME B16.47 Series A and Series B Flanges

Refer to Fig. 2, which shows the comparative dimensions for 30&#; (150 class) Series A and Series B ASME B16.47 flanges.

Fig. 2: ASME B 16.47 Series A vs Series B Flange Dimensions

What is the flange standard for flanges above 60&#; sizes?

Ans: Flanges above 60&#; sizes are usually designed based on the AWWA C207 standards, or they are specifically designed by manufacturers considering the specific requirements of the users/purchasers.

If you want to learn more, please visit our website Weld Neck Flange.