V-Bio is easily installed in the field prior to pipe installation, making it cost-effective and easy to use. DI pipe and V-Bio can be installed in nearly any weather condition. No other product on the market compares.

Are you interested in learning more about centrifugal ductile iron pipe? Contact us today to secure an expert consultation!

Polyethylene encasement has proven to control corrosion in aggressive soils for more than 50 years and is cost-effective. The investment in V-Bio is minimal compared to the project's overall cost, especially when compared to the vastly more expensive alternative of bonded coatings used by the steel pipe industry. Not to mention the even higher costs associated with cathodic protection that is widely used in conjunction with steel.

Bonded coatings used to protect steel pipe are very expensive. Other issues that plague bonded coatings are handling and patching. The thin wall of steel pipe may not have enough beam strength to support its own weight, making for difficult handling.

It is difficult to handle a steel pipe section through installation without some damage to the bonded coatings. Any void in the bonded coating dramatically increases corrosion's potential, and these voids must be repaired. Contractors do not have the luxury of waiting until the sun shines to get the job done.

Time is money, and these folks need a product that is easy to work with, such as DI pipe. Some steel pipes are also coated with cement mortar, which is porous and subject to cracking. Again, any void in the coating increases the potential for corrosion of steel pipe.

Advantages and Disadvantages of Ductile Iron Pipes Compared with Other Pipes

If you are looking for more details, kindly visit ductile iron bend manufacturer.

1. Performance comparison between ductile iron pipes and ordinary cast iron pipes:
       
The production process of ductile iron pipes is to add magnesium, calcium and other alkaline earth metals or rare metals to the raw materials of ordinary cast iron pipes. The casting processes of ductile iron pipes include continuous casting, hot die casting and water-cooled centrifugal casting, among which the water-cooling method is the most advanced process in the world today, and the technical performance of ductile iron in different processes is different.

The production process of ductile iron pipes is to add magnesium, calcium and other alkaline earth metals or rare metals to the raw materials of ordinary cast iron pipes. The casting processes of ductile iron pipes include continuous casting, hot die casting and water-cooled centrifugal casting, among which the water-cooling method is the most advanced process in the world today, and the technical performance of ductile iron in different processes is different.

Compared with ordinary cast iron pipes, it not only maintains the corrosion resistance of ordinary cast iron pipes, but also has the advantages of high strength, good toughness, thin wall, light weight, impact resistance, large bending performance, and convenient installation. Therefore, ductile iron pipes are not only widely used abroad, but also widely used in China. In many areas of our country, ductile iron pipes have been widely used in medium and small diameter water supply pipes.

       
2. Performance comparison between ductile iron pipe and steel pipe:
       
Steel pipes can be divided into

3. Performance comparison between ductile iron pipe and prestressed reinforced concrete pipe:
       
Ductile iron pipes and prestressed reinforced concrete pipes (suitable for large-diameter pipes, the maximum diameter of which exceeds 2000mm), with the following characteristics:
       
(1) To save energy, the main materials are sand and stone, which can be obtained locally.
(2) Heavy weight, brittle texture, difficult cutting and relatively difficult construction.
(3) The working pressure is 20%-40% lower than that of the ductile ink tube, which is 0.15-0.25MPa.
(4) The maximum deflection angle is 1.5 degrees, while the ductile iron pipe can reach a maximum of 3.0 degrees, so the terrain adaptability of the prestressed reinforced concrete pipe is poor.
       
4. Performance comparison between ductile iron pipe and PVC plastic pipe:
       
Compared with ductile iron pipes, PVC pipes are characterized by smooth inner wall, light weight, corrosion resistance, good anti-scaling performance, and low price, but there are many disadvantages, mainly as follows:
       
(1) It is easy to age, expands with heat and contracts with cold, so it should not be exposed to sunlight for a long time, and the storage room temperature should not be greater than 40°C.
(2) Low strength, poor compressive performance, improper construction can easily cause deformation.
(3) The rigidity is poor, the flexibility is poor, and it is easy to cause mouth leakage.

5. Advantages and disadvantages of ductile iron pipes:

Advantages:

1) The ductile pipe has the characteristics of withstanding high water supply pressure, resisting external loads and adapting to changes in geological conditions. It can be applied to areas with poor geology and crossing roads without additional processing of steel pipes. In addition, it has strong corrosion resistance and can be applied to Coastal and saline areas. At present, it is widely used in underground pipeline projects, and large-scale pipeline installation projects can better reflect its advantages of convenient installation and low labor intensity.

2) The ductile iron pipe has good sealing performance and is not easy to leak, which can reduce the leakage rate of the pipe network and reduce the daily maintenance cost of the pipe network.

3) Ductile iron pipes adopt flexible joints, which are more convenient for construction operations, can improve construction efficiency, improve construction conditions, and reduce construction costs. Most of the joints are connected by rubber rings, which are easy to operate, can shorten the construction period, and reduce construction costs.

4) The tensile strength of ductile iron far exceeds that of gray cast iron, but is equivalent to that of steel. Therefore, for parts subject to static loads, the use of ductile iron saves material and is lighter than cast steel. The performance of ductile iron with different substrates varies greatly, and ductile iron has better fatigue strength.

Disadvantages: 

1. The installation of ductile iron pipes is greatly affected by human factors such as operational reasons.
2. The corrosion resistance of the steel pipe is poor and the price is high. Therefore, in general, except for small-diameter pipelines and special projects (such as pipe jacking projects).
3. Ductile iron pipes are generally not used in high-pressure pipe networks and have low pressure resistance. Because the pipe body is relatively bulky, machinery must be used for installation. If there is water leakage after the pressure test, all the pipes must be dug out, the pipes should be hoisted to a height that can be placed in the clamps, and the clamps should be installed to prevent water leakage.

Technical characteristics:

Spherical graphite has a smaller splitting effect on the metal matrix than other shapes of graphite, which can make the strength of cast iron reach 70-90% of the strength of the matrix structure, the tensile strength can reach 120kgf/mm2, and it has good toughness.

The chemical composition of ductile iron except iron is usually: carbon content 3.0-4.0%, silicon content 1.8-3.2%, manganese, phosphorus, sulfur total not more than 3.0%, and appropriate amount of spheroidizing elements such as rare earth and magnesium.

Steel pipes can be divided into seamed steel pipes and seamless steel pipes , and seamed pipes are generally used in the middle of water supply pipes. Compared with ductile iron pipes, steel pipes have the advantages of good toughness, high tensile strength, thin pipe walls, high pressure resistance, long pipes, and fewer joints. The biggest disadvantage is poor corrosion resistance and high price. Therefore, in general, except for small-diameter pipelines and special projects (such as pipe jacking projects).Ductile iron pipes and prestressed reinforced concrete pipes (suitable for large-diameter pipes, the maximum diameter of which exceeds 2000mm), with the following characteristics:(1) To save energy, the main materials are sand and stone, which can be obtained locally.(2) Heavy weight, brittle texture, difficult cutting and relatively difficult construction.(3) The working pressure is 20%-40% lower than that of the ductile ink tube, which is 0.15-0.25MPa.(4) The maximum deflection angle is 1.5 degrees, while the ductile iron pipe can reach a maximum of 3.0 degrees, so the terrain adaptability of the prestressed reinforced concrete pipe is poor.Compared with ductile iron pipes, PVC pipes are characterized by smooth inner wall, light weight, corrosion resistance, good anti-scaling performance, and low price, but there are many disadvantages, mainly as follows:(1) It is easy to age, expands with heat and contracts with cold, so it should not be exposed to sunlight for a long time, and the storage room temperature should not be greater than 40°C.(2) Low strength, poor compressive performance, improper construction can easily cause deformation.(3) The rigidity is poor, the flexibility is poor, and it is easy to cause mouth leakage.1) The ductile pipe has the characteristics of withstanding high water supply pressure, resisting external loads and adapting to changes in geological conditions. It can be applied to areas with poor geology and crossing roads without additional processing of steel pipes. In addition, it has strong corrosion resistance and can be applied to Coastal and saline areas. At present, it is widely used in underground pipeline projects, and large-scale pipeline installation projects can better reflect its advantages of convenient installation and low labor intensity.2) The ductile iron pipe has good sealing performance and is not easy to leak, which can reduce the leakage rate of the pipe network and reduce the daily maintenance cost of the pipe network.3) Ductile iron pipes adopt flexible joints, which are more convenient for construction operations, can improve construction efficiency, improve construction conditions, and reduce construction costs. Most of the joints are connected by rubber rings, which are easy to operate, can shorten the construction period, and reduce construction costs.4) The tensile strength of ductile iron far exceeds that of gray cast iron, but is equivalent to that of steel. Therefore, for parts subject to static loads, the use of ductile iron saves material and is lighter than cast steel. The performance of ductile iron with different substrates varies greatly, and ductile iron has better fatigue strength.1. The installation of ductile iron pipes is greatly affected by human factors such as operational reasons.2. The corrosion resistance of the steel pipe is poor and the price is high. Therefore, in general, except for small-diameter pipelines and special projects (such as pipe jacking projects).3. Ductile iron pipes are generally not used in high-pressure pipe networks and have low pressure resistance. Because the pipe body is relatively bulky, machinery must be used for installation. If there is water leakage after the pressure test, all the pipes must be dug out, the pipes should be hoisted to a height that can be placed in the clamps, and the clamps should be installed to prevent water leakage.Spherical graphite has a smaller splitting effect on the metal matrix than other shapes of graphite, which can make the strength of cast iron reach 70-90% of the strength of the matrix structure, the tensile strength can reach 120kgf/mm2, and it has good toughness.The chemical composition of ductile iron except iron is usually: carbon content 3.0-4.0%, silicon content 1.8-3.2%, manganese, phosphorus, sulfur total not more than 3.0%, and appropriate amount of spheroidizing elements such as rare earth and magnesium.

If you want to learn more, please visit our website ductile iron coupling.